Correct Fender Inflation

Inflation and Valve Guide

How do I inflate my DAN-FENDER ® product?

The most simple way is to use an ordinary compressor including the accessory air pistol and then:

  • Remove the plastic screw (if there is one).

  • Press the air pistol against the metal valve.

  • Blow air into the fender/buoy (0.15 bar at 20 degrees C).

  • A fender/buoy shall NOT be as hard as a stone. It shall be easy to form a soft “dent” by pressing.

  • Screw on the plastic screw (if there is one).

  • Now your fender/buoys are ready for use – have fun!

Copyright © 2014-2018 | All rights reserved to DAN-FENDER ® International | Privacy policyTerms of use